 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Surface Mount Double-Balanced Mixer, 10 - 500 MHz Features Fully Hermetic Package Low Cost Conversion Loss: 7 dB Typical Midband Impedance: 50 Ohms Nominal Maximum Input Power: 400 mW Max, Derated to 85C @ 3.2 mW/C * X Port Current: 50 mA Max. * MIL-STD-883 Screening Available * * * * * MDS-223 V4 SF-1 Description Transformers convert the LO and RF paths to balanced lines connecting to a medium barrier, Schottky diode ring quad. These transformers help provide excellent isolation between ports. Conversion loss is low. The direct connection of the IF port to the diode quad allows these mixers to be used as phase detectors and bi-phase modulators. Electrical Specifications1: TA = -55C to +85C Parameter Frequency Range Conversion Loss Isolation LO to RF Test Conditions RF, LO Ports IF Port Frequency 10 - 500 DC - 500 5 - 150 MHz 150 - 500 MHz 5 - 150 MHz 150 - 500 MHz 5 - 150 MHz 150 - 500 MHz 5 - 150 MHz 150 - 500 MHz -- -- -- -- -- 100 - 350 MHz 350 - 500 MHz Units MHz MHz dB dB dB dB dB dB dB dB -- mV dBm dBm -- dB dB Min -- -- -- 40 35 35 25 25 20 -- -- -- -- -- -- -- Typ -- -- -- -- -- -- -- -- -- -- <1 +2.5 0 -- 55 40 Max -- 7.0 9.0 -- -- -- -- -- -- -- -- -- -- -- -- -- LO to IF RF to IF DC Polarity DC Offset RF Input SSB Noise Figure Typical Two-Tone IM Ratio 1 Negative -- 1 dB Compression 1 dB Desensitization Within 1 dB of Conversion Loss Max with a -10 dBm input, each input, 25 MHz and 35 MHz IF 1. All specifications apply when operated at +7 dBm available LO power with 50 ohm source and load impedance. M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. Surface Mount Double-Balanced Mixer, 10 - 500 MHz Typical Performance Curves MDS-223 V4 Bottom View of SF-1 6X .050 (+.020/-.000) 4X .016 .002 .506 .385 Ref .220 .165 4X .099 .010 .381 .002 .000 .367 .143 .080 .205 .305 .430 Ordering Information Part Number MDS-223 PIN Package SF-1 Pin Configuration Pin No. 1 2 Function GND IF Pin No. 3 4 Function LO RF 2 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. .510 Ref .000 .002 |
Price & Availability of MDS-223PIN
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |